Design & Reuse
arrow Arithmetic & Mathematic (44)
arrow Embedded Memories (1004)
arrow I/O Library (983)
arrow Standard cell (745)
983 IP
51
5.0556
TSMC 22nm ULL Wirebond/Flipchip I/O Library with switchable 1.8V/3.3V GPIO, 3.3V I2C ODIO, and 3.3V Analog Cell
This is an ultra-low leakage library. The GPIO has a worst-case leakage of only 425nA. It works with a wide VDDIO supply range from 1.8V to 3.3V durin...
52
5.0556
TSMC 28nm Wirebond and FlipChip compatible <80fF ESD Solutions for Multi-Gigabit SerDes Applications.
This silicon-proven TSMC 28nm Digital I/O Library delivers a low-capacitance, high-reliability interface solution optimized for advanced semiconductor...
53
5.0556
TSMC 55/65nm RF ESD specifiically targeting low capacitance ESD
RF ESD specifically targetting low capacitance ESD protection strategies. It is not a full IO Library, but a collection of standalone ESD cells. ESD t...
54
5.0556
5V Library for Generic I/O and ESD Applications TSMC 12nm FFC/FFC+ process.
This library is a base set of ESD protection structures for I/O and Power supplies. The design targets up to 8A applications (>8kV HBM).The I/Os are d...
55
5.0
2.8 Gbps LVDS IO
The LVDS I/O is a single macro (input, output and reference block). Both driver and receiver operating up to 1.4GHz (2.8 Gbps ). The Driver is designe...
56
5.0
DDR4IO for memory PHY, 3200Mbps
The DDR4 IO is used to transfer the Command/Address/Clk and Data between the memory controller PHY and the DRAM device. The TX is designed to send inf...
57
5.0
Inline CUP I/O
The inline CUP I/O library provide 3.3V bi- directional I/O cells with pull -up, pull-down features, Schmitt trigger and a range of drive strengths....
58
5.0
IO Library - GLOBALFOUNDRIES 22FDX
The general purpose 22FDX® IO Library features a rich set of digital and analog IO cells covering 1.2 V to 1.8 V I/O standards and 0.4 V to 0.8 V core...
59
5.0
Fully-integrated Low Voltage Differential Signaling (LDVS) transceiver
The LVDS Transceiver is a fully integrated Low-Voltage Differential Signaling (LVDS) Analog Front End (AFE) including one flow-through driver and two ...
60
4.0556
A 3.3V Wirebond I/O Library with 8kV HBM ESD, a 1.2Gbps LVDS Tx, and I2C compliant ODIO
This library ensures robust reliability in challenging environments, with capabilities including 8kV HBM, 500V CDM, and a robust 2kV IEC 61000-4-2 sy...
61
4.0556
A GlobalFoundries 65nm Wirebond IO library with 2.5V GPIO, LVDS TX & RX and 2.5V analog / RF
Key attributes of the GlobalFoundries 65nm IO library are dual selectable drive strengths and independent input & output enable / disable. The GPIO ce...
62
4.0556
A GlobalFoundries 65nm/55nm Wirebond IO Library with 1.2V to 3.3V GPIO and 5V ODIO
Full Custom IO Library. Multi-voltage GPIO Library. Includes 5V Open-Drain; precision PWM Output, 1.2V to 3.3V GPIOs and Analog/RF IOs. Also include ...
63
4.0556
A radiation-hardened GlobalFoundries 12nm LP/LP+ 0.8V LVDS Transceiver
Certus Semiconductor’s 2.5Gbps LVDS transceiver in GlobalFoundries LP/LP+ is designed for high-speed, low-power data transmission in radiation-intensi...
64
4.0556
A radiation-hardened GlobalFoundries 12nm LP/LP+ 0.8V SLVS Transceiver
This SLVS I/O Library delivers a robust, high-performance solution for high-speed differential signaling in GlobalFoundries 12nm process technology. D...
65
4.0556
6.5V ESD Clamp in TSMC180nm Technology
Standalone 6.5V ESD Power Clamp in 180nm technology for use in wirebond or flipchip....
66
4.0556
1.8V & 3.3V Radiation Hardened GPIO with Optimized LDO in GlobalFoundries 12 LP/LP+
This radiation-hardened, by design, library features both a 1.8 and 3.3V GPIO with multiple drive strengths of 2mA, 4mA,8mA, and 16mA, along with a fu...
67
4.0556
1.8V/3.3V Switchable GPIO With 5V I2C Open - Drain & Analog Cells in Samsung 11nm LPP
SAMSUNG 11nm Flip-Chip IO library with dynamically switchable 1.8V/3.3V GPIO with fail-safe capability, 5V I2C / SMBUS open-drain cell, 5V OTP cell, 1...
68
4.0556
Secure Digital I/O offerings
Certus is pleased to offer Secure Digital compliant IOs in advanced technology nodes. Our SD IOs support DS, HS, SDR25, SDR50, DDR50 and SDR104 prot...
69
4.0556
RGMII I/O offerings
Certus is pleased to offer Reduced Gigabit Media Independent Interface (RGMII) compliant IOs in advanced technology nodes. The Certus solutions suppo...
70
4.0556
High-voltage solutions in baseline TSMC and GlobalFoundries technology
Certus is pleased to offer High-voltage ESD solutions across multiple baseline technologies. Distinguishing Certus is our ability to provide high-vol...
71
4.0556
Flipchip 5V Fail-Safe GPIO, 5V GPIO, 5V GPI and I2C Compliant 5V ODIO in Dongbu HiTek 130nm
This flip-chip compatible library in Dongbu HiTek 130nm features a fail-safe GPIO, two standard GPIOs, a 5V GPI, and 5V I2C-compliant ODIO. The GFGPIO...
72
4.0556
IO & ESD solutions supporting GPIO, I2C,RGMII, SD, LVDS, HDMI & analog/RF across multiple technology nodes
Certus Semiconductor has a long history of working across a broad range of technology nodes from 180nm down to the latest FinFet offerings. Our I/O s...
73
4.0556
Specialized 1.2V to 3.3V Fail-Safe GPIO and 3.3V I2C Open-Drain in Dongbu HiTek 110nm
This silicon-proven Wirebond compatible library in Dongbu HiTek 110nm features a multi-voltage, multi-standard General Purpose Input Output with an Op...
74
4.0556
5V ESD Clamp in GlobalFoundries 180nm LPe
5V, ESD clamp in GlobalFoundries 180nm that can be used for either signal protection or 1.8V Power supplies. The clamp is a compact single cell, 44um ...
75
4.0556
LVDS RX & TX IOs in multiple foundry technology
Certus provides full LVDS RX & TX IOs in GlobalFoundries and other foundry technologies. The Certus LVDS solutions are ANSI/TIA/EIA-644-A compliant a...
76
2.2581
40Mbps LVDS IO
40Mbps LVDS IO...
77
2.0
7 way DDR combo
The LPDDR2/3_DDR3/4 libraries contain the 7-way combo driver/receiver cells with embedded power cells, the driver impedance calibration cell, and the ...
78
2.0
7 way DDR combo
The LPDDR2/3_DDR3/4 libraries contain the 7-way combo driver/receiver cells with embedded power cells, the driver impedance calibration cell, and the ...
79
2.0
1.2V GPIO
The 1.2V GPIO library provides a bidirectional I/O driver for Parallel Trace Interface applications. This cell is compliant with version 2.0 of the th...
80
2.0
1.2V GPIO library designed for the SVID three-line interface.
The 1.2V GPIO library provides an open-drain bi-directional I/O driver designed for the SVID three-line interface. It is compliant with the Intel SVID...
81
2.0
3.3V Fault Tolerant General Purpose I/O Inline Pad Set
The 3.3V GPIO FT library provides general purpose bidirectional I/O cells that are fault tolerant. These programmable, multi-voltage I/O’s give the sy...
82
2.0
3.3V Fault Tolerant General Purpose I/O Staggered Pad Set
The 3.3V GPIO FT library provides general purpose bidirectional I/O cells that are fault tolerant. These programmable, multi-voltage I/O’s give the sy...
83
2.0
3.3V General Purpose I/O Inline Pad Set
The 3.3V GPIO library provides general purpose bidirectional I/O cells. These programmable, multi-voltage I/O’s give the system designer the flexibili...
84
2.0
3.3V General Purpose I/O Staggered Pad Set
The 3.3V GPIO library provides general purpose bidirectional I/O cells. These programmable, multi-voltage I/O’s give the system designer the flexibili...
85
2.0
3.3V 100 MHz Oscillator I/O Pad Set
The 1.8V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of power cells along with corner and spa...
86
2.0
3.3V 100MHz Oscillator I/O Pad Set
The 3.3V 100MHz Oscillators library includes a programmable oscillator macro I/O cell. ▪ 100 MHz programmable oscillator These libraries are off...
87
2.0
3.3V 32 KHz RTC and Programmable 100MHz Oscillator I/O Pad Set
The Oscillator library provides oscillators for on-chip asynchronous clock generation with an appropriate external crystal. This library is provided...
88
2.0
3.3V 32 KHz RTC and Programmable 100MHz Oscillator I/O Pad Set
The Oscillators library provides oscillators for on-chip asynchronous clock generation with an appropriate external crystal. This library is offered a...
89
2.0
3.3V 32kHz RTC, 50MHz Low Power Oscillator, and Programmable 100MHz Oscillator Pad Set
The Oscillators library provides oscillators for on-chip asynchronous clock generation with an appropriate external crystal. This library is offered a...
90
2.0
3.3V GPIO: Fault Tolerant
The 3.3V Fault-Tolerant General Purpose I/O libraries provide programmable, multi-voltage bidirectional I/O’s that give the system designer the flexib...
91
2.0
3.3V Power Support I/O Pad Set
The 3.3V Support: Power library provides a full complement of cells to support the assembly of a complete pad ring by abutment. It is supplied as a st...
92
2.0
3.3V Wide Ranging GPIO
The 3.3V General Purpose I/O libraries provide bidirectional I/O, isolated analog I/O, and a full complement of I/O power, core power, and analog pow...
93
2.0
3.3V Wide-Range General Purpose I/O Pad Set
The 3.3V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of power cells along with corner and spa...
94
2.0
3.3V Wide-Range General Purpose I/O Pad Set
The 3.3V General Purpose I/O library provides bidirectional I/O, analog I/O, and a full complement of I/O power, core power, and analog power cells al...
95
2.0
3.3V Wide-Range General Purpose I/O Pad Set
The 3.3V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of I/O power, core power, and analog power...
96
2.0
3.3V Wide-Range General Purpose I/O Pad Set
The 3.3V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of power cells along with corner and space...
97
2.0
3.3V Wide-Range General Purpose Inline I/O Pad Set
The 3.3V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of power cells along with corner and spa...
98
2.0
3.3V Wide-Range General Purpose Staggered I/O Pad Set
The 3.3V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of I/O power, core power, and analog power...
99
2.0
3.3V Wide-Range General Purpose Staggered I/O Pad Set
The 3.3V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of power cells along with corner and spa...
100
2.0
3.3V Wide-Range General Purpose Staggered I/O Pad Set
The 3.3V GPIO library provides general purpose bidirectional I/O cells. These programmable, multi-voltage I/O’s give the system designer the flexibili...